Fixation - Amann Girrbach Ceramill zolid Instructions D'utilisation

F I X A T I O N
Staining and glazing
▷ Stain and glaze the units afterwards. We recommend using the
E N
Amann Girrbach stain and glaze kit for this (please also refer to the
processing instructions of the stain and glaze kit).

Fixation

Conventional cementation:
Due to the high strength and stability of the restorations, conven-
tional fixation with zinc-oxide phosphate cement or glass ionomer
cement (e.g., GC Fuji Plus) is possible in most cases.
▷ When applying conventional cementation, observe sufficient reten-
tion and a minimum abutment height of 3 mm!
Adhesive fixation:
For adhesive fixation, we recommend the bonding composite Pana-
®
via 21 or Panavia
the zirconium-oxide frame material.
Provisional cementation is not recommended, as the frames can be
subject to damage upon removal.
36
Due to the high translucency of this zirconium oxide, the selec-
tion of cement shade and possible discolourations of the tooth
stump are to be observed, as these may affect the final colour
result.
®
F 2.0, owing to the excellent bond strength with