Properties - Amann Girrbach Ceramill zolid Instructions D'utilisation

P R O P E R T I E S

Properties

Intended use
E N
Zirconium-oxide blanks for permanent and removable dental pros-
thetics.
Product Description
The blanks are made of zirconium oxide (ZrO ) for type II, class 4 den-
2
tal applications in accordance with DIN EN ISO 6872.
They are used for manufacturing carrier structures for permanent
and removable prosthetic restorations (e.g., crowns and three-unit
bridges into the molar region) using CNC milling machines (e.g.,
Ceramill Motion).
These blanks are not stained with the Ceramill Liquids, but monolithi-
cally stained upon successful final sintering with Ceramill Stain&Glaze
or used as frame for veneering.
After completion of the specified end-sintering, the material meets
the requirements of DIN EN ISO 6872.
The imprinted side of the blank is the occlusal side.
25