McCulloch B26PS Manuel D'utilisation page 6

Introduction..................................................................... 6
Safety..............................................................................7
Assembly...................................................................... 11
Operation...................................................................... 13
Maintenance................................................................. 15
Product description
This product is a brushcutter with a combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Intended use
The product can be used with a grass blade or a trimmer
head to cut different types of vegetation. Do not use the
Product overview
(Fig. 1)
1. Trimmer head
2. Grease filler cap, bevel gear
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Shaft coupling
7. Loop handle
8. Throttle trigger
9. Stop switch
10. Throttle trigger lockout
11. Spark plug cap and spark plug
12. Starter rope handle
13. Fuel tank
14. Air filter cover
15. Air purge bulb
16. Choke control
17. Drive disc
18. Operator's manual
19. Wrench
20. Blade
21. J-handle
22. Support flange
23. Washer
24. Locknut
25. Harness
26. Suspension ring
27. Locking pin
6
Contents
Troubleshooting............................................................ 17
Transportation and storage...........................................18
Technical data.............................................................. 18
Accessories.................................................................. 19
EC Declaration of Conformity....................................... 20
Introduction
product for other tasks than grass trimming and grass
clearing. Use a grass blade or trimmer head to cut
grass.
Note: National or local regulations may regulate the use.
Comply to given regulations.
28. Transport guard
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
WARNING! Be careful and use the product
correctly. This product can cause serious
injury or death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
The product agrees with the applicable EC
directives.
The product can cause objects to eject,
which can cause injury.
Keep a minimum of 15 m distance to
persons and animals during operation of the
product.
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
Maximum speed of the output shaft.
1228 - 001 - 12.07.2019