Mode "Connection To Existing Wlan; Setting The Wlan Mode (Wi-Fi) Of The Integrated Camera; Fig. 8 Configuration Page Of Stemi 305 Cam - Zeiss Stemi 305 Mode D'emploi

Stereo microscope
Stemi 305 cam
4.1.2

Mode "Connection to existing WLAN"

In this mode, after entry of the password, the Stemi 305 cam connects to an existing WLAN (can be
selected by the user).
It can be provided either by another Stemi 305 cam or by a separate WLAN router.
Upon connecting several Stemi 305 cams and one or several iPads to the same WLAN, all connected
microscopes are displayed simultaneously in the App Labscope / Matscope. Thus, the user can change
between the microscopes with ease.
When using the WLAN of one of the Stemi 305 cams, approx. 3 microscopes and 3 iPads can be
interconnected without this delaying the live stream.
Via an external WLAN router of the N300 class, 10 microscopes and 10 iPads can be used without
problems. If additional (connected via cables) WLAN Access Points are used, the WLAN can be scaled up
even further. Thus, scenarios with multiple microscopes / iPads can be implemented in the same tutorial
room.
4.2

Setting the WLAN mode (Wi-Fi) of the integrated camera

The WLAN mode of the Stemi 305 cam can be changed as follows by means of the configuration website
(Configure Microscope):
•
Start the App Labscope on the iPad (see Fig. 8).
Fig. 8 Configuration page of Stemi 305 cam
•
Touch the button Advanced camera settings and, in the following pop-up window, the link
WLAN configuration web-interface.
03/2015
OPERATION OF THE INTEGRATED CAMERA WITH WI-FI
Setting the WLAN mode (Wi-Fi) of the integrated camera
435063-9044-008
ZEISS
19