Technical Installation Instructions; Installing The Oven In The Unit; Important Information - F.Bertazzoni Professional Série Instructions D'installation Et D'utilisation

TECHNICAL INSTALLATION INSTRUCTIONS

TECHNICAL INSTALLATION INSTRUCTIONS
The installation, adjustments, transformations and
maintenance listed in this section must only be
performed by qualifi ed technicians (in accordance
with applicable legislation). Incorrect installation
can cause property damage and injury to people
or pets; the manufacturer shall not be held liable
in this event. The appliance's automatic regulation
or safety devices may only be modifi ed by the
manufacturer or a duly authorised supplier during
the appliance's lifetime.
Ensure all necessary PPE is used when
carrying out the installation

INSTALLING THE OVEN IN THE UNIT

Ensure that the oven is fully present and
undamaged after removing all loose parts from
their inner and outer packaging. In the event of
any uncertainty, do not use the appliance and
contact technical support.
Check that the kitchen unit is suitable for installation
of the oven, referring to the dimensions given in
this guide.
595
556

IMPORTANT INFORMATION

The oven is only suitable for installation inside
a fi tted kitchen unit or carcase. The sides and
surrounding surfaces must be able to withstand
temperatures of up to 90°C.
Installation of the appliance must be performed
in accordance with the provisions of applicable
legislation.
An opening must be present in the rear of the
carcase to allow for oven ventilation, as shown in
the fi gure.
Use the supplied brackets to attach to the carcase
(two brackets per side, see fi gure below).
520
70 450
550
A = 21 MOD
A = 23 HER
A = 24 PRO
A
/ Installation
484
86°
23.5
EN
7