Function Setting; Temperature Setting - SCHOLTES SOTC1410B Manuel D'utilisation

3.4 Function setting

In standby mode, press the « » button to start the cup heating function to 40 ° C.
«40 ° C» appears in the display.
Adjust the temperature using the «+» or «-» buttons.
To select the heating time press the « » button, then adjust using the «+» or «-»
buttons.
Press " " to save the temperature and time.
Close the door, the device beeps and then turns on.
Note :
While adjusting the parameters, you can select the other modes
Before closing the door, you can press « » to cancel the settings, the device will
return to standby mode.
While the device is in operation you can open the drawer and adjust all parameters.
Then press « » to save your changes.
After making these settings, you can press « » to return to standby mode or close
the door to turn on the appliance.
Note:
When the machine is turned on, if you open the drawer the buzzer will sound once and
the machine will go into standby mode. «0» is displayed.
During the time setting process, if you do not perform any operation for 3 minutes, the
unit will return to standby mode.
When you press a key, a beep informs you that your action has been taken into
account.
Once your program is finished, the device will ring three times to inform you.

3.5 Temperature setting

Each function has its own temperature range. The temperature can be changed in
ranges of 5 ° C. The last selected temperature is automatically memorized and is
displayed by default the next time you use it.
48