Checking The Lawn Mower; Testing The Controls; During Operation; Adjusting The Cutting Height - Stihl RMA 460 V Notice D'emploi

English

17 Checking the Lawn Mower

17.1 Testing the Controls

Before starting work, confirm that the switch lever
lockout (1), switch lever (3), self-propel lever (2) and speed
lever (4) are undamaged and functioning properly.
2
3
1

18 During Operation

18.1 Adjusting the Cutting Height

1
28
To adjust the cutting height:
► Pull the cutting height adjustment lever (1) out of the
recess and set it to the selected position.
A marking indicates the selected cutting height.
8 different cutting heights can be selected:
– Position 1: 0.79 in. (25 mm)
– Position 2: 1.01 in. (34 mm)
– Position 3: 1.24 in. (44mm)
– Position 4: 1.46 in. (54 mm)
– Position 5: 1.69 in. (64 mm)
– Position 6: 1.91 in. (76 mm)
4
– Position 7: 2.13 in. (88 mm)
– Position 8: 2.4 in. (100 mm)
NOTICE
To reduce the risk of damaging the lawn mower, never
attempt to lift, carry or transport the lawn mower by the
cutting height adjustment lever.
NOTICE
To avoid overloading the motor, avoid setting the cutting
height too low in tall grass. If the motor speed begins to slow,
raise the cutting height.

18.2 Activating ECO Mode

When the ECO mode is selected, the mower operates at a
lower RPM for situations requiring less power. This
increases energy efficiency and battery runtime.
17 Checking the Lawn Mower
0458-818-8221-A