Initial Start-Up - afx light MINIWASH718 Manuel D'utilisation

Resetting the Unit
Press the "MODE/ESC" button and choose "rEST"(restore). Press "ENTER" to confirm. The unit powers itself down
and then on again for a few seconds. During this time, the LED display will scroll "rEST" from left to right, after which
normal operation recommences.
Restoring factory defaults
Press the "MODE/ESC" button and choose "LoAD"(load). Press "ENTER" to confirm. The LED display will change to
"d001" to confirm a factory reset has been completed

Initial start-up

During the warm up time, the unit will auto test itself for a few seconds. During this time the LED display will scroll
"rEST" from left to right .The unit then start to operate normally
f- DMX Modes
The unit supports 8 and 13 channel DMX Sub-modes from a standard controller. When a suitable DMX connection is
made, the "decimal point" in "d.001" will flash.
Setting DMX Addresses
Use the "MODE/ESC" button to display "d001", "UP" and "DOWN" buttons allows individual DMX addresses to be
set from "d001" to "d512"
Choosing between DMX Sub-modes
The LED display shows the chosen control mode when the "MODE" button is pressed. Use "UP" and "DOWN"
buttons to choose the appropriated DMX control Mode
LED Display
10CH
15CH
Color Options
The Unit offers a range of 16 preset colors. These can be individually selected with DMX control and feature in Auto
Run Sound Active modes.
Color Options
Color Preset
White Yellow
Red Purple
Dark Green Orange
Dark Blue Light Green
Light Blue Pink
Magenta Brown
Crimson Gold
Violet Dark Purple
©Copyright LOTRONIC 2015
DMX Sub-mode
10Channel
15channel
MINIWASH718 Page 8