afx light MINIWASH718 Manuel D'utilisation page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
4. OPERATING INSTRUCTIONS
4.1 Navigation through the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD Display.
Button
Function
<MODE/ESC>
Used to access the menu or to return to a previous menu option
<UP>
Scrolls through menu options in ascending order
<DOWN>
Scrolls through menu options in descending order
<ENTER>
Used to select and store the current menu or option within a menu
When a menu function is selected, the display will show immediately the first
available option for the selected menu function. To select a menu item, press <ENTER>.
4.2 Menu map
Six distinct operating modes, many with sub-modes, are supported by the unit. Press the <MODE/ESC> button
repeatedly until you reach the desired menu function. Use the <UP> and <DOWN> buttons to navigate the menu
options. Press the <ENTER> button to select the menu function currently displayed or to enable a menu option. To
return to the previous option or menu without changing the value, press the <MODE/ESC> button. After a few
seconds, the LED Display will back during operation until another button is pressed.
4.3 User configurations
Setting Maximum Pan Angles
To select, use the "MODE/ESC" button and choose "PA18", "PA36",or "PA54". "UP" and "DOWN" buttons cycle
between all available Pan Angles. Press the "ENTER" button to confirm the chosen selection.
LED Display
PA18
PA36
PA54
Setting Maximum Tilt Angles
To select, use the "MODE/ESC" button and choose "t.9" or "t.18" "UP" and "DOWN" buttons cycle between all
available Tilt Angles. Press the "ENTER" button to confirm the chosen selection.
LED Display
t.9
t.18
a-Built-in Program Mode
As the unit can be mounted hung on a truss system or stand on a flat surface, pan, tilt and LED display settings can
be reversed to provide correct coverage and ease of use.
Setting Reversed or Normal Pan
Press the "MODE/ESC" button and choose "Pan"(normal) or "r Pan" (reversed). "UP" and "DOWN" buttons cycle
between the two settings. Press the "ENTER" button to confirm the selection
©Copyright LOTRONIC 2015
Maximum Pan
180º
360º
540º
Maximum Tilt
90º
180º
MINIWASH718
Page 6

Publicité

Table des Matières
loading

Table des Matières