General Indications - Miche SYNTIUM WR DX Manuel D'utilisation Et D'entretien

ENGLISH

GENERAL INDICATIONS

1
We thank you for buying the SYNTIUM WR DX wheels, product
that will guarantee you security and functionality through the
years.
Before proceeding with using the wheels, please read carefully
the following instruction and store them in a safe place for
eventually reusing.
In the box of wheel set you will find:
• The front wheel arranged with TX-12 system
• The rear wheel arranged with TX-12 system
• The manual of instructions and use of Wheels
• Rim tapes
Caution! Only use the Miche supplied rim tapes with your
!
Miche wheels and only with the correct clincher tyre and
inner tube. The standard supplied rim tapes are not sui-
table for Tubeless Ready tyres wheels conversion.
Warning
!
Any modification or alteration (and graphic) of the product
with non-original spare parts or spare parts not delivered
directly by Fac Michelin S.r.l., involves the expiration of the
guarantee.
Warning
!
Direct and violent impacts on broken road surfaces can
cause damage to the rims. Such damage is outside the con-
ditions of our guarantee and repair costs will be charged
directly to the customer.
Warning
!
In case of strange impact caused from bad road base or
wheels transport, we trust to bring the wheels to your me-
chanic for a check.
Warning
!
Tyre width section: min 28 / max 42
Warning
!
Only Shimano original lock ring designed for through axle
internal diameter 27mm to be used with the disc brake.
Warning before using the bicycle:
• C heck for proper operation and state of wear of all the
components before starting to ride. Before any maintenan-
ce operations on your wheels, always wear gloves and
protection glasses.
• The rims have been made with great dimensional precision.
If fitting a tyre on a rim is too easy, it may be too big and
this will have significant implications for safety. We there-
fore recommend using only high quality tyres that require
the use of clincher tyre levers and a reasonable amount of
strength to fit them. Using a tyre that is too big for the rim
may cause the tyre to rupture unexpectedly and cause acci-
dents, physical injuries or even death. WARNING! Incorrect
rim / clincher tyre coupling may cause it to deflate, burst
or detach suddenly and cause accidents, serious injuries
or even death.
• Check the condition and pressure of the tires fitted to your
wheels. Please consult the manufacture of your tires of choi-
ce when inflating your tyres.
• Check that the wheels are firmly anchored to the frame with
the locking item closed in the correct position. If there is
the passing through pin, consult the installation instructions
provided by the manufacturer of the bicycle or fork.
Warning, an incorrect locking may cause the detachment
of the wheel and derive in accidents and serious or fatal
injuries.
• C heck the tension of the spokes so as to notice any spokes
which got loose. In the case spokes are loose, contact a qua-
lified mechanic or special personnel to perform the tensio-
ning.
Warning, the use of wheels not centered properly or with
spokes broken and/or loosen or damaged may cause an
accident, serious injury or death.
• C heck that the braking system and the brake pads in the bra-
ke calipers are in good state and that the screws on the disc
or the locking ring of the disc, depending on your model, are
properly locked.
• T o the users of more than 78 kg weight, Fac Michelin S.r.l.
suggests to check the wheels status to the mechanic every
two months or every 500km.
• If the total weight of your bike and various parts installed
exceeds 109 kg, not used these wheels.
• Never wash the pieces with pressure-fed water because wa-
ter may get through the seals and cause permanent damage
to the internal components. We recommend washing compo-
nents with a sponge, mild soap, and water.
• Salt water environments (as found on winter roads and
neat the seaside) can cause galvanic corrosion on most
bike parts. Carefully rinse, clean, dry and re-lubricate
all exposed parts to avoid damage, malfunctions and
accidents.
• If your component shows signs of rust, this means it
has to be changed URGENTELY as it might be a sign of
damage.
7