Operating Sequence - Zanussi ZWG 3144 Notice D'utilisation

Operating sequence

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 95°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you have selected the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
«MAX» mark.
P1175
.
.
, without exceeding the
P1174
4. Select the desired programme
Turn the programme selector dial to the desired
position.
The light of the START/PAUSE button starts to flash.
5. Select the spin speed
The light corresponding to the depressed button
illuminates.
Reduction
essorage
Lage
toeren
6. Select the required options
The light corresponding to the depressed button
illuminates.
Reduction
essorage Rinçage +
Lage
toeren Spoelen +
7. Select the DELAY START option
To delay starting of a programme, press the DELAY
START button, before starting the machine, until the
light corresponding to the required delay illuminates.
71