Cleaning The Lavatory; Troubleshooting - Toto LLT152 Manuel D'installation

Troubleshooting the Lighting Operation
„ Check that the toggle switch located on the power adapter is turned on.
„ Verify that the wall outlet and switch are working properly.
„ Verify that the power adapter is plugged into the wall outlet.
„ Verify that the LED connector is connected to the power adapter connector.
„ Inspect all wiring for damage.
„ Wipe the bowl with a soft cloth and warm soapy water or mild cleaning detergent.
Dry the bowl using a soft clean cloth.
„ Clean oily dirt, residue, etc. off the bowl with a soft cloth and ethyl alcohol.
„ Regularly drying the upper face of the bowl will help maintain the appearance of
the lavatory.
„ To remove a clog in the drain, gently pull the drain cover
up and out to access the drain and remove the clog.
Please read this section to see if you can troubleshoot the problem before request-
ing a repair. If you still cannot solve the problem after reviewing this section, please
contact TOTO .
®
Tests and Results
Is the circuit breaker thrown?
Is the wiring or LED damaged?
Tests and Results
Is the LED faded due to product lifespan?
(The lifespan is approximately 25,000 hours
and the brightness drops by 70%.)

CLEANING THE LAVATORY

TROUBLESHOOTING

Problem: The bowl does not light up
Problem: The light of the bowl is faded
6
Solutions
Check that the circuit breaker is not
thrown.
Replace any damaged parts.
Solutions
Replace the LED with a new one.
Drain