arjo AtmosAir 9000A Manuel D'utilisation page 23

Guidance and manufacturer's declaration - electromagnetic immunity
the AtmosAir MRS should assure that it is used in such an environment.
Immunity Test
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with
the applicable RF compliance level above, the AtmosAir MRS should be observed to verify normal operation.
If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating
the AtmosAir MRS.
IEC 60601 Test Compliance Level
Level
3Vrms
3 Vrms
Electromagnetic Environment Guidance
Portable and mobile RF communications equipment
should be used no closer to any part of the AtmosAir
MRS, including cables, than the recommended
separation distance calculated from the equation
application to the frequency of the transmitter.
Recommended Separation Distance
3 Vrms
Battery Operated Device
3.5
E
1
d=[ — ]
3 Vrms
7
E
1
d=[ — ]
Where P is the maximum output power rating
of the transmitter in watts (W) according
to the transmitter manufacturer and is the
recommended separation distance in metres (m).
determined by an electromagnetic site survey
(see note a) should be less than the compliance
level in each frequency range (see note b).
Interference may occur in the vicinity of equipment
marked with the following symbol:
P
P
19