MRA 4025066163311 Instructions De Montage page 5

10. Remount the Allen screw on the motorcycle. Take care to ensure that the washer slides over the
metal sleeve (P4) and the rubber grommet presses against it. Fully tighten the screws.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
spirits to clean the screen as they will damage it.
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
2