dji MATRICE 200 Série Guide De Démarrage Rapide page 7

4. Preparing the Aircraft
Unfolding the D-RTK Antennas
For the M200 series, only mount the D-RTK antennas to the M210 RTK.
Unfold the D-RTK antennas and tighten the screws.
2
Installing the Landing Gears
Mounting the Propellers
Propellers without
silver rings should be
installed on unmarked
motors.
6
1
Unfolding the Aircraft
Unfold the frame arm, slide the arm lock to the end of the frame
arm, then rotate it about 90° until the silver line lies within the
range of the
1
Press the propeller
down onto the mounting
plate and rotate it in the
direction indicated by the
lock icon
icon.
until secure.
Propellers with silver
rings should be
installed on motors
with the same color
marks.
Check that the propellers are secure
before each flight.
3
2