Kemper KHS CoolFlow 618 01 001 Manuel D'utilisation page 55

Calling up operating parameters
To display the operating parameters, briefly press the
operating conditions can be called up here. The
operating parameters.
The meaning of the individual parameters can be found in the list below.
ID
U01 Water inlet temperature
U02 Water outlet temperature
U03 Suction gas temperature
U04 Heat gas temperature
U05 Ambient temperature
U06 Finned heat exchanger temp.
U07 Low pressure
U08 High pressure
U09 Throttle setting
Short
and
Designation
Short
key on the start screen. Now the sensor values and other
keys can be used to navigate between the different
ID
U10 Current compressor frequency
U11 Required compressor frequency
U12 Suction gas overheating
U13 Heat gas overheating
U14 Current fan speed
U15 Not used
U16 Not used
U17 Driver status
- 07.2020 / K410061801001-00 - 55/44
© www.kemper-olpe.de
EN
Short
Designation