Operation - Kemper KHS CoolFlow 618 01 001 Manuel D'utilisation

Operation

Display/control unit
The controller of the chiller is operated with touch pad, which is located right on the unit in a housing protected
from splashed water. To open the housing, press the "PRESS" button on the right-hand side of the housing. After
operating the controller, close the housing again in order to prevent water ingress.
If there is no activity on the controller for longer than 60 seconds, the display switches to stand-by mode and no
values are displayed. The display can be activated by touching any part of the display.
Button symbol Designation
1)
Mode key
On/off key
Up arrow key
Down arrow key
Clock key
Operating modes can be changed, temperature settings can be adjusted and para-
meters set by pressing the mode key
The system can be switched on and off with the On/Off key. In addition, it is also
possible to cancel the current operation and return to the previous operating stage.
Values can be adjusted and pages scrolled through with the up arrow key
Values can be adjusted and pages scrolled through with the down arrow key
The clock key is used to set up and execute timer functions
© www.kemper-olpe.de
Description
- 07.2020 / K410061801001-00 - 47/44
EN