Kemper KHS CoolFlow 618 01 001 Manuel D'utilisation page 51

Saving timer programs
To save a timer program, briefly press the
The key appears on the right-hand side of the screen.
Press this for 2 seconds.
Now you can select a switch-on or switch-off point with the
ON 1 = Switch-on point for the first timer program
OFF 1 = Switch-off point for the first timer program
ON 2 = Switch-on point for the second timer program
OFF 2 = Switch-off point for the second timer program
Use the key to confirm your selection. The display for the hours starts to flash.
The hours can now be adjusted with the
Confirm the hours with the
the and keys.
Confirm again by briefly pressing the
To exit the timer menu, press the
In order to cancel the adjustment process press the
the values.
Short
Short
Short
and keys simultaneously.
and keys.
key and the minute display starts to flash. The minutes can now be adjusted with
key and the settings are saved.
key briefly
2 sec.
Short
Short
and keys.
key to return to the start screen without changing any of
- 07.2020 / K410061801001-00 - 51/44
© www.kemper-olpe.de
EN
Short
Short
Short