Kemper KHS CoolFlow 618 01 001 Manuel D'utilisation page 52

EN
If the system is deactivated and the time set for a switch-on point (ON1, ON2) is reached, the system activates
autonomously. It then carries out the operation with the settings before deactivating again.
If the system is activated and the time set for a switch-off point (OFF1, OFF2) is reached, the system de-activates
autonomously.
In order to guarantee the cooling supply for the cold water cooler permanently, it is recommended not to store
timer programs on the chiller. Any desired temporary switch-off of the cold water circulation should be set only
via the controller of the cold water cooler. The chiller regulates the cooling capacity requirement autonomously
and switches off the cooling circuit completely if necessary.
52/44 - K410061801001-00 / 07.2020 -
© www.kemper-olpe.de