EUROM CEILINGHEAT 1500 RC Mode D'emploi page 12


Tightly screw in the 4 small screws (5) into these holes; the appliance is now secure on its wall
bracket.

If needed, you can adjust the appliance's projection angle to 2x25°. Never train the projection
at a short distance (<150 cm) onto ceilings, walls, furniture, or any flammable items!

Check everything is properly secured.
Suspended from the ceiling:

Select a spot on the ceiling that is strong enough to bear the load of the patio projector long-
term.

At the right distance (see picture), drill 2 holes (Ø 8mm) for the plugs and secure the ceiling
plate (2) using the 2 long screws (3) to the ceiling. The cable clip (B) must be on the same
side as the electric cable and socket.

Fix both the suspension lines (4) into the designated attachments (A) of the ceiling plate. By
sliding the sheath around the line in the attachment, the line block is raised; the line can be
shortened or lengthened. Ensure that the lines are always the same length, so that the
appliance hangs fully horizontal.

Click the electric cable into the ceiling plate's cable holder (B) and feed away from the
appliance.
12