3
Check the power cord and the power plug.
WARNING
◦Periodically remove dust, etc. from the power plug.
Failure to do so may result in insulation failure due to
humidity, etc., which may cause fire. (Remove dust
using a dry cloth.)
◦Never operate the unit if it has a damaged
power cord or plug. Return the unit to the
nearest authorized service center if it is not
working properly, if it has been dropped or
damaged, or if it has been immersed in water.
◦Keep power cords away from heated surfaces.
Do not carry the unit by the power cord.
4
Switching on the power supply
●
❶
Insert the power plug into an electrical outlet.
●
❷
Turn the lock switch key to the "open" position.
●
❸
Slide the power switch to the "on" position.
WARNING
◦Fully insert the power plug to reduce the risk
of short-circuit and fire.
◦ Always use sockets and wiring devices at the
correct rated value.
◦ Use at the specified power supply 120 V, AC.
Failure to do so may result in electric shock or fire
due to overheating.
◦Do not insert or unplug the power plug with
wet hands.
Doing so may cause electric shock.
Be careful not to trip
over the power cord.
Be sure to push the connector all
the way into the appliance inlet.
❶
●
lock switch
open
❷
●
lock
▶Continued on the next page
power
off
on
❸
●
EN21