Assembly - Panasonic EP-MA73 Mode D'emploi

Assembly

1
Attaching the controller stand to the right or left side panel of this unit
Fasten the controller stand with the
attachment screws. (4 positions)
Use this screw ... Attachment screws (M6 × 13)
How to tighten the screws
Attachment screw
Hole
2
Fasten the armrest with the attachment screws.
❶ ●
Insert the armrest into the unit.
● "R" (right side) and "L" (left side) are indicated
at the bottom of the armrest.
● Insert the armrest from the top aligning the ▲
marks on the side of the armrest.
●
Be careful to avoid pinching your fingers and air plugs.
❷ ●
Slide the armrest toward the back
while pushing it downward.
● ❸
Fasten the armrest with the attachment
screws. (One position for each side)
Use this screw ... Attachment screws (M6 × 29)
How to tighten the screws
EN16
× 4 pcs. (Black)
●
Tighten the 4 screws
lightly using your fingers.
(Make the screws level
with the holes.)
●
Tighten firmly with the allen key.
Allen key
●
Screw may be damaged if
you tighten the screw inserted
into the hole crookedly using
an allen key.
× 2 pcs. (Silver)
●
Put an attachment screw
on the edge of the allen
Allen key key and tighten the screw
horizontally to the hole.
●
Screw may be damaged
if you tighten the screw
inserted into the hole
crookedly using an allen key.
<When attaching on the right side panel>
●
Align the 2 prongs of the
side panel with the holes
of the controller stand.
(On both the right and left sides)
<When attaching the right armrest>
❶ ●
Back
Align the ▲
marks.
❸ ●
Controller
Stand
Front
❷ ●