Using The Product - TESTO 511 Mode D'emploi

3 Press (
4 Repeat steps 2 and 3 for all functions.
- The instrument changes to measuring mode.

Using the product

To measure the barometric pressure, the height above mean
sea level must be set correctly, see chapter 'First steps',
section 'Basic settings (configuration mode)'.
To measure the height between two points, the height above
mean sea level at the starting point must be known and set
correctly, see chapter 'First steps', section 'Basic settings
(configuration mode)'.
Switching t t he i i nstrument o o n:
Press .
- Measuring mode is opened.
Switching t t he d d isplay l l ight o o n:
The instrument is switched on.
Press .
- The display light goes out automatically if no key is
pressed for 10 seconds.
Changing t t he p p arameter:
The parameter can be changed.
Adjustable parameters
· Absolute pressure
· barom (barometric pressure)
· Altitude (height above mean sea level)
Press several times until the desired parameter appears.
Changing t t he d d isplay v v iew:
Adjustable views
· Current reading
· Max: Maximum values since the instrument was last switched on or last reset.
· Min: Minimum values since the instrument was last switched on or last reset.
Press several times until the desired view appears.
) to confirm the input.
Use the product
15