Using The Product; Commissioning - TESTO 623 Mode D'emploi

6
Pos: 26 /TD/Produkt verwenden/testo623/testo 623 Inbetriebnahme @ 4\mod_1254827956852_79.doc @ 51413 @ 2
6.1.
Update date & time flashes activate Yes / deactivate No activate Yes / deactivate No
info@Testo-Direct.com

Using the product

Commissioning

The date and time must be set on commissioning.
1. Select the required function with [Set].
If no button is pressed > 30 sec, the testo 623 changes to
Measuring Mode. To perform additional settings, press and
hold [Set] for 2 sec.
> The adjustable parameter flashes.
2. Set values with
settings, see following table).
To scroll rapidly forward and back in the respective menu,
press and hold
Press [Esc]
Hold [Set] down for 2 s to save previously set values and
leave the menu.
- Instrument returns to the display.
Display
DD.MM.YYYY flashes
or
MM.DD.YYYY flashes
Year flashes
Month flashes
Day flashes
24H or 12H (AM/PM)
flash
Hour flashes
Minute flashes
Second flashes
°C flashes
If the power supply is interrupted the settings are being
saved for at least 3 min.
www.
◄ ►
[ ]or [ ] and confirm entry with
◄ ►
[ ].
or
to cancel settings without saving them.
Function
Set date format
Set year
Set month
Set day
Set time format
Set hour value
Set minute value
Set second value 00 - 59
Set unit for
temperature
Testo-Direct
6 Using the product
[Set] (for
Setting option
DD.MM.YYYY = day,
month, year
MM.DD.YYYY =
month, day, year
2009 - 2099
01 - 12
01 - 31
24h/12h
00 - 23 or 01 - 12
00 - 59
°C/°F
1.888.475.5235
.com
31