Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6 Using the product
6
Using the product
Pos: 29 /TD/Produkt verwenden/testo 622/testo 622 Inbetriebnahme @ 4\mod_1254471440026_79.doc @ 51077 @ 2
6.1.
Commissioning
The date and time must be set on commissioning.
1. Select the required function with [Set].
> The adjustable parameter flashes.
2. Set values with
settings, see following table).
-
Instrument returns to the display.
Display
DD.MM.YYYY
or
MM.DD.YYYY
Year flashes
Month flashes
Day flashes
24H
or
flash
Hour flashes
Minute flashes
Second flashes
°C
flashes
Update date & time flashes activate Yes / deactivate No activate Yes / deactivate No
30
If no button is pressed > 30 sec, the testo 622 changes to
Measuring Mode. To perform additional settings, press and
hold
[Set]
for 2 sec.
[
]
or
L
To scroll rapidly forward and back in the relevant menu,
press and hold
[
L
[Esc]
Press
to cancel settings without saving them.
[Set]
Hold
down for 2 s to save previously set values and
leave the menu.
Function
flashes
Set date format
flashes
Set year
Set month
Set day
12H (AM/PM)
Set time format
Set hour value
Set minute value
Set second value 00 - 59
Set unit for
temperature
If the power supply is interrupted the settings are being
saved for at least 3 min.
[
]
and confirm entry with
M
].
or
M
[Set]
(for
Setting option
DD.MM.YYYY
= day,
month, year
MM.DD.YYYY
=
month, day, year
2009 - 2099
01 - 12
01 - 31
24h/12h
00 - 23 or 01 - 12
00 - 59
°C/°F
Publicité
Chapitres
Table des Matières
