Using The Inverter; Cleaning And Caring For The Inverter - Dometic Waeco SinePower MSI212 Instructions De Montage Et De Service

Using the inverter

8 Using the inverter
I
NOTE
 When operating the inverter at a high load for lengthy periods,
it is advisable to start the engine in order to recharge the vehi-
cle battery.
 You can operate the inverter with the engine running or
switched off. However, do not start the engine while the
inverter is switched on, since the power supply to the cigarette
lighter is disconnected during ignition.
➤ Lift up the cover (fig. 5 2, page 5).
➤ Connect your power consuming device, to the socket (fig. 1 3, page 3)
of the inverter.
➤ Switch the inverter on by pressing the switch (fig. 1 1, page 3) on the
device (position "I") ...
➤ ... or (MSI412, MSI424 only) switch on the inverter using the external
switch (optional).
✓ The green Status LED lights up (fig. 1 2, page 3). The power consuming
device is supplied with voltage.
Charging the device via the USB port
I
NOTE
Also observe the operating manual of the device you want to
charge via the USB port.
➤ Connect the device to the USB port (fig. 1 4, page 3) of the inverter.
9

Cleaning and caring for the inverter

A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Occasionally clean the device with a damp cloth.
28
SinePower
EN