Dometic Waeco SinePower MSI212 Instructions De Montage Et De Service page 22

Safety instructions
 Maintenance and repair work may only be carried out by quali-
fied personnel who are familiar with the risks involved and the
relevant regulations.
2.2 Safety when installing the device
WARNING!
!
 Take the precautions necessary to ensure that children cannot
interfere with operation.
Dangerous situations may occur which cannot be recognised by
children!
CAUTION!
!
 Ensure the device is standing firmly.
The device must be set up and fastened in such a way that it
cannot tip over or fall down.
NOTICE!
A
 Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
Electrical cables
CAUTION!
!
 Lay the cables so that they cannot be tripped over or damaged.
NOTICE!
A
 If cables have to be fed through metal walls or other walls with
sharp edges, use ducts or wire bushings to prevent damage.
 Do not lay cables which are loose or bent next to electrically
conductive material (metal).
 Do not pull on the cables.
 Do not lay the 230 V mains cable and the 12/24 V DC cable in
the same duct.
 Fasten the cables securely.
22
SinePower
EN