Publicité
Les langues disponibles
Les langues disponibles
Payload
4
The maximum permissible roof load is calculated as
follows: (example):
Maximum permissible
roof load (1):
minus the assembly weight
of the basic carriers bars (2):
minus the assembly weight
of the accessory (3, 4):
Maximum payload:
Fitting
These installation instructions show the front basic
carrier bar being fitted. Follow the same procedure to
fit the rear basic carrier bar.
Carry out the installation with the help of a second
person.
1. Open the covers completely.
2
1
M+P-03F-7975
165 lbs (75,0 kg)
12 lbs (5,5 kg)
42 lbs (19,0 kg)
111 lbs (50,5 kg)
6
3
4
2. Unlock the covers (6) with the key (3) and
remove them from the basic carrier bar (1).
3. Loosen the screws (9) a quarter turn using
the tool (4).
Note
Adjusting the screws (9) allows you to adapt the
basic carrier bars to the exact width of the vehicle
roof. This adjustment must be made when fitting
the carrier bars for the first time.
4. On both sides of the basic carrier bar (1), lift the
red lever (10) up. Fold the quick-release lever (11)
down and turn it to the right.
5. Place the basic carrier bar (1) as indicated, in the
correct position on the vehicle roof (7), so that the
feet (12) are seated in the fastening points (13).
M+P-03F-8018
- 5 -
9
1
4
1
10
7
11
12
13
3
9
6
M+P-03F-8019
M+P-03F-8020
Publicité
