FriFri Pasta 311 Manuel D'installation page 51

7 Automatic programs and manual program
7.1 Selection of an automatic program
From the main screen the access is allowed by pushing Automatic Program.
Back to the
previous menu
After selected the program needed, by using the movement arrows, touch ENTER to start the cooking cycle.
Notes: the number of programs is flashing on a negative background.
Notes: all the programs by default start with a set time of 2 minutes (to modify the default value look at the parameters
modify section).
7.2 Cooking cycle
7.2.1 Phase of loading water "LOADING"
Stop water
loading
During the water loading on the screen appears the written LOADING.
Notes: to stop the water loading touch EXIT and confirm with YES in the following menu.
Notes: default after every 5 cooking cycles on the screen appears the written SALT at the same time of the buzzer's
sound that reminds to the operator to salt the water (to change the default value look at the section parameters
modification) to stop the buzzer's sound on START. Important: salt the water only when it boils. Do not never add
the salt when the water is cold.
Movement
arrows
Program
number
Cooking
time
Confirmation
Program
number
Cooking time
left
Water loading