Hydraulic System; Environmental Conditions; Materials; Electromagnetic Compliance (Emc) Information - Invacare Kirilos Manuel D'utilisation

Invacare® Kirilos / Atlante
Intermittent
(periodic motor
10%, max. 2 min. / 18 min.
operation)
Battery capacity
Manual
emergency
lowering
Electric
emergency
lowering / lifting

10.3 Hydraulic system

Technical specifications of hydraulic pump
Push rod max. stroke
Push force (dynamic)
Maximum static load
Rod load / lever load ratio
Weight

10.4 Environmental conditions

Storage and
transportation
Temperature -10°C to +50°C
44
Kirilos Atlante Electric
2.9 Ah
Yes
Yes
Atlante Hydraulic
300 mm
310 daN. at 95 Bar
390 daN. at 120 Bar
20 / 1
9 Kg. (9.2 daN)
Operation
+5°C to +40°C
Relative humidity 20% to 75%
Atmospheric
pressure

10.5 Materials

Component
Base, legs, mast and boom
Hanger bar
Actuator housing, hand
control, mast protector,
casters and other plastic
parts
Carabiner, bolts and nuts
10.6 Electromagnetic compliance (EMC)
information
Medical Electrical Equipment needs to be installed and used
according to the EMC information in this manual.
This equipment has been tested and found to comply
with EMC limits specified by IEC/EN 60601-1-2 for Class B
equipment.
Portable and mobile RF communications equipment can
affect the operation of this equipment.
Other devices may experience interference from even the
low levels of electromagnetic emissions permitted by the
20% to 90%
at 30°C, not
condensing
795 hPa to 1060 hPa
Material
Steel, powder coated
Steel, powder coated and
foam
material according to
marking (PA, PP, PE)
Steel, rust protected,
zinc-plated
1551341-E