LAVAZZA CLASSY PLUS Mode D'emploi page 23

Problem
On / Stand-by button
in red.
The loading lever either does
not reach the supply position
or requires an excessive closing
effort.
Coffee is dispensed too fast and,
therefore, is not so creamy.
The coffee is cold.
TROUBLESHOOTING
Possible causes
blinking » Inadequate machine storing
conditions / Temporary lock.
» Spent capsule drawer filled.
» Capsule stuck.
» A previously used capsule is
used.
» Capsule not present.
» Capsule not compatible.
» Slow supplying – hydraulic
circuit clogged with limescale.
Solution
» Unplug the machine from the
power socket and allow it to rest
at room temperature enough
time (max. 1 hour).
Plug the machine in again, then
press the switch-on button
(make one attempt only).
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Empty the tray and make an
attempt at closing the lever.
» Open and close the lever to
drop the capsule.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Use a new capsule.
» Insert the capsule.
» Try again by using another
capsule from a different
package.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Perform the descaling
procedure by means of the
Lavazza descaling product.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
EN
23