LAVAZZA CLASSY PLUS Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Position the cup or mug on the cup rest grid,
then pull up the capsule loading handle.
When the capsule loading handle is open, insert
the LAVAZZA Blue or Expert capsules in the
appropriate pod-holder
Never put fingers or objects in the pod-holder.
Only LAVAZZA Blue or Expert capsules must
be inserted into the pod-holder.
Lower the capsule loading handle.
PREPARING COFFEE BREWING
Verify that the machine is ready (the coffee key
will light up to a steady light).
Press one of the coffee supply keys to start
delivering.
During the heating-up phase, the desired bev-
erage can be pre-selected by simply press-
ing the respective icon (this icon will be fully
switched on whereas all the other beverages
icons will be switched off).
When the machine reaches the set-point tem-
perature, the state will have to change from
"heating-up" to "Ready to brew", and the ma-
chine will start the preselect beverage.
In any case, the preselection can be cancelled
by pressing the same button again (the machine
will return to the previous condition).
Be careful when reserving a drink, do not forget to
put a cup under the dispenser
When the machine is ready, it will automatically
starts dispensing.
The machine will automatically stop delivering
when the programmed measure is reached.
During the coffee brewing phase, the pressed key
will flash.
After delivering, the key will light up again to in-
dicate that the machine is ready.
EN
11

Publicité

Table des Matières
loading

Table des Matières