LAVAZZA CLASSY PLUS Mode D'emploi page 21

Problem
Machine noisy.
Unit ready for use but failing to
acknowledge the button press.
The lever remains closed after
the supply.
TROUBLESHOOTING
Possible causes
» The machine does not test on a
flat, stable surface.
» The power supply cable has
been positioned incorrectly.
» Movable parts not fitted
properly.
» No water in the tank.
» Capsule not present.
» Wrong button press/activation.
» Used capsule collection tray not
fitted.
» Used capsule tray full.
Solution
» Check the surface.
» Check the correct position of
the cable in the base of the
machine.
» Fit the movable parts properly.
» Top up the tank with fresh
drinking water.
» Insert a Lavazza Blue or Expert
capsule or a compatible one.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE
» Press one of the illuminated
buttons with your fingertip, then
check for the acoustic signal
(if activated) and the proper
blinking of the selected icon.
» Check the correct insertion of
the tray, with the resulting alarm
warning lamp switch-off.
Check for correct supplying.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE
» Empty the tray and try to open
the lever.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE
EN
21