Sms − Text Messages - switel DFT 107 Série Mode D'emploi

SMS − Text Messages
11 SMS − Text Messages
Conditions for using SMS
The telephone connection must be equipped with the CLIP
Contact your telephone network provider to ensure this feature is ena-
bled on your telephone connection. To use the SMS
lephone network provider must enable it.
S
A text cannot be sent from every private branch exchange
extension.
If you want to send SMS text messages from a private branch
exchange extension, it is necessary to store the number for
an outside line for your PBX in the handset preceding the
Service Centre number.
S
Sending SMS messages is not available for Call−by−Call
connections at present.
S
Sending SMS messages is liable to costs.
S
If the recipient in the conventional telephone network does not
use an SMS service or his telephone is not basically equipped to
handle SMS messages, the SMS is automatically converted to a
voice message.
S
Costs are charged by your telephone network provider.
SMS Service Centre
SMS messages are distributed via a Service Centre. If you want to
send SMS text messages, you must first program a service centre
number in your handset . Page 96. Please contact the provider of
your choice for the necessary service centre call numbers and the
procedure for enabling the SMS service.
1
CLIP: Calling Line Identification Presentation = Display the cal-
ler's phone number.
2
SMS: Short Message Service = Service for sending text messa-
ges.
104
1
feature.
2
service, your te-
Send Centre 1
Swisscom: 0622100000
Entering text
The digit keys are also labelled with letters for the entry of the respec-
tive text. Letters, digits and special characters are entered by pressing
the relevant key the respective number of times. Please refer to the
Menu Structure for a description of the navigation for writing texts
. Page 95.
Ã
Clear
3 sec. Clear
SMS text templates
There are 5 pre−programmed text templates available . Page 95.
SMS alert signal (alarm)
An acoustic signal is issued when a new SMS text message is recei-
ved. The signal can be activated or deactivated via the menu. Refer to
Page 96 for the sequence of menu option selections.
Your telephone has already been prepared to send SMS text
messages. Service centre numbers are already program-
med in the handset. Activate the required Service Centre in
the SMS menu . Page 96.
Send Centre 2
Cablecom: 0435375370
Switch between upper and lower
case
Delete the last character entered
Delete the entire text