Printer; Underfloor Weighing - KERN PKS 200-3 Mode D'emploi

8.3 Printer

The serial interface RS 232 facilitates the connection of a printer. The printout shows the
weight in grams. In counting mode either the piece number or the weight details will be
printed out.
In percentage mode the percentage proportion or the weight details will be printed out.
Printout will take place after pressing the PRINT key.
It is possible to number each printout continuously with the help of the numerator.
The numerator will be reset to (000) each time the balance is turned off or the CLEAR
function is actuated.

8.4 Underfloor weighing

Objects which are unsuitable for placement on the weighing tray due to their size or shape
can be weighed with the help of the underfloor weighing facility.
Proceed as follows:
• Switch off balance.
• Turn over the balance and in doing so take care that the weighing plate is not loaded.
• Open the closing lid on the bottom of your balance.
• Mount the hooks for underfloor weighing.
• Put the balance over an opening
• Suspend the goods to be weighed from the hook and carry out the weighing.
Always ensure that all suspended objects are stable enough to hold the
▬
desired goods to be weighed safely (danger of breaking).
▬ Never suspend loads that exceed the stated maximum load (max)
(danger of breaking)
▬ Always ensure that there are no persons, animals or objects that might be
CAUTION
damaged underneath the load.
After completing the underfloor weighing the opening on the bottom of the
balance must always be closed (dust protection).
26 PKS-BA-e-1615