Components
Operating Guide
Cutting Template
Tools Needed
____________________________________________________________________________________________________________________________________________
How the SmartDoor
Using radio-frequency technology, the SmartDoor
a battery power-driven fl ap to unlock so your pets can come and go as they please. When the
SmartDoor
no longer senses your pets' SmartKey
™
The SmartDoor
can detect up to fi ve programmed SmartKeys
™
modes: fully locked mode and unlocked mode.
Install the SmartDoor
SmartDoor
SmartDoor
Conversion Kits are available for wall installation applications. The wall extension
™
conversion kit frames out exposed areas, giving your door installation a clean, smooth, fi nished
look. For brick, concrete or block wall construction an additional extension is available for the
large conversion kit. Note: The SmartDoor
the brick and does not require additional tunnel extensions. You may purchase a SmartDoor
Conversion Kit or large extensions through selected online websites, www.petsafe.net or by calling
our Customer Care Center. See "Replacement Parts" on page 12.
Key Defi nitions
Radio-Frequency Technology – The use of a radio-frequency signal that can be transmitted
without wires.
SmartKey
– A SmartKey
™
the SmartDoor
.
™
4
Located inside the battery
compartment is the SmartKey
battery, mounting screws and key ring.
Interior Frame
with Flap
Exterior Frame
™
Conversion Kit
™
is a battery-operated transmitter that sends a unique code to
™
1-800-732-2677
™
, RFA-67
Works
reads a SmartKey
™
, the fl ap automatically locks back into place.
™
Through a Wall with the
™
Conversion Kit Small is designed to be recessed into
™
SmartKey
Mounting Screws
(4 pcs. small door)
(8 pcs. large door)
Key Ring
• Jigsaw or Keyhole Saw
• Electric Drill
⅜
•
" (10 mm) Drill Bit
• Phillips Screwdriver
• 4 D-Cell (LR20)
Batteries (required)
• Level
• Tape
• Pencil
• String
's unique signal and triggers
™
and also operates in two other
™
Battery
™
(PetSafe
®
RFA-67)
™