Festo DGE Notice D'utilisation page 68

DGE−...−ZR/−SP
Each time maintenance is carried out:
· Make sure that the slide is set free of play
and distortion.
Fig. 43 shows the critical points.
Increasing the tension of the cover band for guaranteeing the IP protection class
(if necessary with a second person):
Fig. 44
1. Push the slide into an end position.
2. Remove the cover cap (if present) from the opposite side (è Fig. 44).
3. Unscrew the threaded pins a little.
4. With the aid of flat pliers, pull the cover band until it just begins to lift up the
black wiper strip.
5. Tighten the threaded pins again.
Rated @
8/12/18
25/40
63
6. Press the cover cap tight again.
68
Ó Ó Ó Ó
Tightening torque
1 Nm
2 Nm
3 Nm
2.
1.
Fig. 43
Festo DGE−...−ZR/−SP 0909f English
3.