Oceanic OCEACLIM120SR Guide D'utilisation page 54

B. Operation principles of each mode:
1. Automatic mode
When the Automatic mode
automatically operates and selects the operation mode Cool
depending on the room temperature.
-
If the room temperature is the same as or above 24°C, the appliance will
run in Cool mode
-
If the room temperature is under 24°C, the appliance will run in Fan mode
.
2. Cool mode
When the room temperature is higher than the set temperature, the compressor
will start to run.
When the room temperature is lower than the set temperature, the compressor
will stop but the upper fan will operate at the selected speed.
3. Fan mode
In this operation mode, the selection of temperature is disabled. The upper fan
functions at the preset temperature. The compressor and the fan at the bottom
will not function.
4. Heating mode
The heating mode will be in function when the room temperature is lower than
the set temperature. If the room temperature is higher than the set temperature,
the heating mode will stop functioning.
5. Sleep function
The appliance can be put to Sleep function only when it is in Cool mode
Heating mode
will function in slow speed. The set temperature will increase by 1°C after one
hour of functioning, by 2°C after two hours. After six hours, the appliance stops.
In Heating mode
The set temperature will decrease by 1°C after one hour, by 2°C after two hours.
After six hours of functioning, the appliance stops.
:
.
:
:
:
. Press the button
, the upper fan will function automatically in slow speed.
is selected, the temperature sensor
to activate this function. The upper fan
53
or Fan
or