Bügelgriff Montieren; Assembling The Curved Handle; Assembling The Grass Box; Operation - Grizzly ERM 1333 G Traduction De La Notice D'utilisation Originale

GB
Montage
Ziehen Sie vor allen Arbeiten an dem
Gerät den Netzstecker. Es besteht
die Gefahr von Personenschäden.
Bügelgriff montieren

Assembling the Curved Handle

B
1. Insert the lower bar (3) into the
slot on the lawnmower housing
(10).
2. Fix the bar (3) using the en-
closed screws.
C
3. Fasten the bow-type handle (1)
with the enclosed screws, the
washers and the upper tighten-
ing levers (2) both right and
left of the lower bar (3). Two
positions are possible. There
are two possible positions.
4. Turn the tightening lever (2) in
the clockwise direction.
5. Lock the tightening lever (2) by
pressing it in the direction of
the bar
lever fit the bar so that a ten-
sioning with medium force can
be carried out. Otherwise, the
tightening levers must be turned
clockwise for tensioning them or
anti-clockwise to loosen them
‚
( ).
6. Clip the cable holder (12) into
the bar (3) and thus fix the ca-
ble. (11).
60

). The tightening

Assembling the Grass Box

1. Insert the locating tab (17) into
the bottom of the grass catcher
(6).
2. Assemble both parts of the
grass catcher (6).
3. Attach the handle (4) to the top
of the grass catcher (6).
Do not work with the lawnmower
without the collision guard or
lawn box. There is a risk of in-
jury..

Operation

Hanging On/
Removing the Grass Box
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of
1. To hang on the grass box (6), lift
the collision guard (5) and hang
on the grass box. Fold the col-
lision guard (5) onto the grass
box (6). It holds the grass box in
the correct position.
2. To remove the grass box (6),
lift the collision guard (5) and
detach the grass box. Fold the
collision guard (5) back onto the
mower housing (10).
injury..