Grizzly ERM 1333 G Traduction De La Notice D'utilisation Originale page 58

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
GB
The equipment is not to be lifted or
transported while the motor is running.
Switch off the equipment if it has to be
tilted in transit, when crossing surfaces
other than grass, and when the equip-
ment is being transported to and from
the surfaces to be mowed.
Always keep the grass ejection hole
clean and clear. Remove cut material
only when the equipment is stopped.
Do not leave the equipment unat-
tended in the workplace.
Do not work with equipment that is dam-
aged, incomplete, or has been modified
without the authorisation of the manu-
facturer. Do not use the equipment with
damaged safety devices or screens or
with missing safety equipment such as
deflection and/or grass collection de-
vices.
Do not overload the equipment. Work
only within the specified power range
and do not change the regulator set-
tings on the motor. Do not use low-
powered machines for heavy work. Do
not use your equipment for purposes
other than those for which it is de-
signed.
Do not use the equipment near
inflammable liquids or gases. Non-
observance will result in a risk of fire
or explosion.
Do not lift or carry the equipment
when the motor is running.
Switch off the equipment and discon-
nect the plug:
- Whenever you leave the machine,
- Before cleaning the ejection hole
or removing blockages,
- When the equipment is out of use,
- Before checking, cleaning or work-
ing on the equipment,
- If the power cable is damaged or
frayed,
58
- If the equipment has hit a foreign
object or if strange vibrations occur
during work. In this case, check the
equipment for damage and have it
repaired if applicable.
- ensure that all nuts, bolts and
screws are tight.
- check the mower for possible dam-
age.
- repair damaged parts if necessary.
Do not place feet or hands near or
under rotating parts. Do not stand in
front of the grass ejection hole during
sickle mowing.
Maintenance and Storage:
When servicing the blades, ensure
that the blades can be moved, even if
the power source is switched off.
Ensure that all nuts, bolts and screws
are tightened firmly and the equip-
ment is in safe working condition.
Do not attempt to repair the equip-
ment yourself unless you have been
trained to do so. Any work not speci-
fied in these instructions is to be car-
ried out only by customer service
centres that we have authorised.
Keep the equipment in a dry location
and out of reach of children.
Handle the equipment with care.
Keep tools sharp and clean, in order
to facilitate better and safer work. Fol-
low the maintenance instructions.
Wear protective gloves when chang-
ing the cutting device.
Regularly check the grass collec-
tion device for wear and strains.
For safety reasons, replace worn or
damaged parts. When adjusting the
blades, take particular care to avoid
fingers being trapped between the
rotating blades and fixed parts of the
machine.

Publicité

Table des Matières
loading

Table des Matières