Pairing With A Radio Wireless Commander/Receiver (For Radio Wireless Flash Photography) - Sony HVL-F60RM Mode D'emploi
Unité flash qui peut être utilisée avec les appareils photo à objectif interchangeable sony, les caméscopes numériquees hd à objectif interchangeable et les appareils photo numériques sony pourvu d'une griffe multi-interface classique
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Pairing with a radio wireless commander/receiver (for
radio wireless flash photography)
To perform radio wireless flash
photography with this flash
unit, you need another flash
unit that supports radio wireless
communications in addition to this
flash unit and must pair them both
together.
For pairing this flash unit with
a radio wireless commander/
receiver (not supplied), refer to the
operating instructions supplied
with the device.
Hint
• You need to bring both devices
within 1 m from each other for
pairing.
• You can pair the flash unit with up
to 15 receiver units.
1
Turn on the power to this
flash unit and the other
device.
2
Press the WL button ( ) to
display the screen for setting
the wireless mode, and then
specify one flash unit as the
commander unit and the
other as the receiver unit.
GB
18
Hint
• This flash unit is capable of using 2
• You can view or delete the paired
• To specify a flash unit as
the commander unit, select
[CMD].
• To specify a flash unit as the
receiver unit, select [RCV].
types of wireless communications
for wireless flash photography:
radio and optical wireless
communications. You can select
the wireless type by selecting [
/
SELECT] on the MENU screen.
For setting the unit to use optical
wireless communications, refer to
the Help Guide (page 2).
receiver unit(s) by selecting [PAIRED
DEVICE] on the MENU screen.
Publicité
Chapitres
Table des Matières
