Operating Devices; Filter Holders - Conti Super Essika SSK2 Notice Technique

BOILER PRESSURE - MANOMETER
The boiler pressure has been adjusted between 0,9 bars and 1,2 bars, within the green
area of the manometer.
An automatic regulation ensures the maintain of a constant pressure.
The machine should not operate with the manometer in the red area.
Turn the machine immediately off and call the maintenance service.
NOTE:
The overheating thermostat will interrupt the boiler heating when the temperature
increases abnormally.
18.

OPERATING DEVICES

COFFEE PUSH-BUTTONS
The machines features 5 coffee push-buttons:
1 espresso cup, 2 espresso cups, 1 standard cup, 2 standard cups, continious flow.
Each push-buttons could be programmed individually – see measure programming.
Press a push- button; the programmed coffee measure will be delivered. The flow can
be stopped by pressing again the same button. The led is lighting during the coffee
delivery.
STEAM TAP
Two manuals steam tap 'V' allows to heat liquids by injecting steam.
The liquid container should be high enough; the steam nozzle should soak into the
liquid but not touch the bottom
HOT WATER TAP
A manual tap 'E' allows to prepare hot water specialities (tea, grog, etc.)
FILTERS
The machine is supplied with 1-cup and 2-cup filters. Always ensure that the filters are
unclogged and clean. To remove used coffee grounds from the filter, turn the filter
holder upside-down and tap it lightly on the edge of a wooden box.

FILTER HOLDERS

Never take the filter holder off when the group is operating; ensure first that the liquid
has stopped flowing from the filterholder outlets.
Always leave the filter-holder on the machine with the filters filled with the coffee
grounds of the previous coffee to maintain the temperature of the filterholder.
When the machine is switched off for an extended period, remove the filter holders and
expel the used coffee grounds.
- 19 -