Drive And Adjusting Function Indications; Lights (If Buttons Available); Indicator Lights - Vermeiren LiNX 200 Mode D'emploi

Drive and adjusting function indications

Drive slow-down

Lights (if buttons available)

Hazard lights

Indicator lights

Driving lights
To notify the user that a drive slow-down is active
(only for the lift function), the drive wheel LED and the
lift function LED's are slowly pulsed on and off. The
LED's pulse for the duration of driving or adjusting
function demand.
There are two lighting control buttons, which are
situated below the horn button.
The left-hand button controls the left indicator and the
hazard lights. The right-hand button controls the right
indicator and the driving lights. The operation of these
is described below.
To switch on the hazard lights, press and quickly
release the left-hand lighting button once. LED's
behind the left-hand button and right-hand button will
flash on and off for the duration the hazard lights are
operating.
To switch off the hazard lights, press the left-hand or
right-hand lighting button.
To switch on the left indicator, press and hold the left-
hand lighting button once. The LED behind the left-
hand button will flash on and off for the duration the
left indicator lights are operating.
To switch on the right indicator, press and hold the
right-hand lighting button once.
The LED below the right-hand button will flash on and
off for the duration the right indicator lights are
operating.
To switch off either indicator, press the left-hand or
right-hand lighting button.
To switch on the driving lights, press and quickly
release the right-hand lighting button once. The LED
behind the right-hand button will remain on for the
duration the driving lights are operating.
To switch off the position lights, press the right-hand
or left-hand lighting button.
7
LiNX 200
vA - 2016-09