Truma Frostair 1700 Mode D'emploi Et Instructions De Montage page 13

Before starting any drilling,
always ensure that there
are no cables, gas lines,
frame sections, or similar
items located or concealed
behind the drilling area!
When installing the device
be sure that the condensa-
tion water drain tube does
not get folded. This would
lead to leaks, and the con-
densation water could
penetrate into the vehicle!
In order to guarantee trou-
ble-free air circulation, the
apertures in the base of
the appliance and the floor
of the vehicle must be lo-
cated precisely above one
another. If this is not en-
sured, it cannot be guaran-
teed that the device will
work without any prob-
lems!
Installing the
infra-red receiver
Fig. F:
230 V electrical
connection
Cold air distribution
and circulating air
return feed
Important note:
Important note:
Function test/
Mounting for the
remote control