HumanTechnik InfraLight A-4010-0 Mode D'emploi page 19

Symptom
Receiver doesn't work.
No audio signals being
received.
The audio transmission
is of poor quality, noisy,
distorted, unclear or no
audio signals being
received.
Battery pack no longer
gives the expected ope-
rating time per charge.
Cause
No battery is inserted
into the receiver.
Battery is discharged
The "line of sight" bet-
ween your transmitter
and receiver is obstruc-
ted or you are too far
away with your receiver
from the transmitter.
Battery is discharged
Battery pack is not fully
charged.
Battery pack has
reached its recharging
limit.
Solution
Insert a battery into the
receiver.
Replace battery with a
fully charged one.
Make sure that the front
side of the transmitter is
not obstructed and that it
is a free "line of sight"
transmission possibility.
Make sure you are not
located too far away
from your transmitter.
Replace battery with a
fully charged one.
Recharge the battery for
the correct time.
Replace battery pack
with a new one.
english 19