Door Locking System; Automatic Door Locking During Pyrolytic Cycle; Oven Lights; Cleaning And Maintenance - BORETTI BPOP-60 Notice D'emploi

dOOR LOCKInG SYSTeM

Automatic door locking during pyrolytic cycle

For safety reasons, the door is locked automatically as soon as self-clean mode is
selected (both standard, both eco clean). The door is also unlocked automatically
when the clean time has expired but only after the temperature has fallen below
the safety threshold.
It is not possible to exclude the door locking device during self-
cleaning i.e. manually unlock the door since the self-cleaning
mode has the highest priority and overrides all other selections.
The lock symbol ( ) on the display is:
On
When the door is fully locked
OFF
When the door is fully unlocked
FLASHInG
When the latch mechanism is moving. (After self clean the
sym
bol will flash until the temperature will be safe and the door

Oven lights

They turn on during all cooking activities but they are always disabled in self-clean.
64
nOTe

CLeAnInG And MAInTenAnCe

Prior to taking any action for cleaning, make sure the apparatus is cut-out from
the mains.
It is recommended that the oven interior be frequently cleaned. In particular, it
should be cleaned every time the grill is used to prevent excessive fouling of the oven
interior that may generate fumes or odours during subsequent cooking. Abrasive
detergents and steam cleaning equipment should not be used for cleaning.
WARnInG
do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
Ovens provided with the hot air system are less subject to dirt inside.

Self-cleaning cycle (pyrolytic cycles)

Although it is not necessary to perform the cleaning operation each time the oven
has been used, do not let the oven get too dirty.
Before performing self-cleaning, take out all accessories (grills, dishes, pans) to
avoid damaging them, remove large cooking residues and then close the door,
ensuring that it is closed properly.
Usually self-cleaning requires 2.30 to 3 hours according to the
amount of residue to be removed.
WARnInG
ensure that the door is in the closed position before
the self-cleaning cycle starts, otherwise automatic door
locking will not be completed. See paragraphs that
follows.
When the cycle is finished and the oven has COOLed COMPLeTeLY, remove the
burned-off residues of the self-cleaning cycle with a damp cloth.
nOTe
NL
FR
EN
DE
65