Nederman MagnaTrack S Manuel D'utilisation page 17

4
Fit the adaptor
at the back
edge of
the rail.
Connect the cable to the
disconnection box.
6
Roll the trolley in to the guide track.
Connect the horizontal hose.
MagnaTrack S
5
Suspend the hose by threading the
carriers into the guide track. Make
sure the carriers are correctly
fitted according to the figure to
the right. Also check that they
are running freely so they do not
snag in the guide rail joints.
Fit the disconnection magnet on the
front part of the guide track and on
the same side as the disconnection
box on the trolley. The exact distan-
ce of the disconnection magnet from
the front edge of the guide
track must be checked
according to the
installation
checklist,
see page 20.
Connect the cable
to a transformer,
secondary voltage
24 V AC.
7
8
Fit the end stop in the
front edge of the rail.
GB
17