Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.
Recommended grounding method
A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, unplug refrigerator or disconnect power.
Product Dimensions
Height dimensions are shown with the leveling legs NOT
extended.
The power cord is 60" (152.4 cm) long.
Front View
30¹⁄₈"
(76.6 cm)
Side View (door open 90°)
Top View
If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
34³⁄₈"
carpenter. See dimension drawings for panel specifications.
(87.4 cm)
IMPORTANT:
34¹⁄₈"
(86.8 cm)
47³⁄₄"
(121.4 cm)
26¹⁄₈"
(66.4 cm)
23⁷⁄₈"
(60.6 cm)
³⁄₄
*Dimension includes
" thick custom door panel
Custom Overlay Panel
The thickness of the overlay panel must be ³⁄₄" (1.91 cm).
Overlay panel must not weigh more than 20 lbs (9.07 kg).
Overlay panels weighing more than recommended may
cause damage to your appliance.
21⁵⁄₈"
(55.0 cm)
23⁷⁄₈" *
(60.7 cm)
5
Publicité
Table des Matières
