Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your beverage center into its final location, it is
important to make sure you have the proper electrical connection.
Recommended grounding method
A 115 Volt, 60 Hz., AC only, 15– or 20–amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your beverage center be provided. Use an
outlet that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, unplug beverage center or disconnect
power.
Product Dimensions
Height dimensions are shown with the leveling legs NOT
extended.
The power cord is 60" (152.4 cm) long.
Front View
30¹⁄₈"
(76.6 cm)
Side View (door open 90°)
Top View
If you plan to install a custom overlay frame, you will need to
create the frame yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for frame specifications.
34³⁄₈"
IMPORTANT:
(87.4 cm)
34¹⁄₈"
(86.8 cm)
47³⁄₄"
(121.4 cm)
26¹⁄₈"
(66.4 cm)
23⁷⁄₈"
(60.6 cm)
³⁄₄
*Dimension includes
" thick custom door panel
Custom Overlay Frame
The thickness of the overlay frame must be ³⁄₄" (1.91 cm).
Overlay frame must not weigh more than 10 lbs (4.54 kg).
Overlay frames weighing more than recommended may
cause damage to your appliance.
21⁵⁄₈"
(55.0 cm)
23⁷⁄₈" *
(60.7 cm)
5
Publicité
Table des Matières
