Digital Indicator Assembly Kit - Ametek CHATILLON MT Série Manuel D'utilisation

3.4 Digital Indicator Assembly Kit

The digital indicator assembly instructions are as follows:
3.4.1 Assemble CROSS BEAM (Item 1) to top of lever or hand-wheel assembly of MT
test stand using two SCREWS (Item 8).
3.4.2 Assemble MTG PLATE (Item 2) to CROSS BEAM (Item 1) using two SCREWS
(Item 8).
3.4.3 Assemble ACTUATOR ARM (Item 4) to the lower two screw holes of the DIGITAL
INDICATOR (Item 6) using two SCREWS (Item 7).
3.4.4 Assemble DIGITAL INDICATOR (Item 6) to MTG PLATE (Item 2) using two
SCREWS (Item 5).
3.4.5 Assemble ACTUATOR ARM (Item 4) to movable RACK on MT teststand using
5/16-18 ADAPTER (Item 3).
7
MT Series User Manual